Ul U347 Wall Assembly. Features 2’ wide vertical members which are inserted into A SE

Features 2’ wide vertical members which are inserted into A SEPARATION WALL SERIESACCESSORIES Area Separation Wall assemblies are designed for use in multi-family, multi-story townhouses as a fir. Unless otherwise specified, the face layers of all assemblies, except those with predecorated surfaces or exterior gypsum sheathing, shall have The protected wall (s), consisting of wood or steel framing and one layer of gypsum board, provide structural integrity for the area separation wall and provides additional fire Members by the American Iron and Steel Institute. 0329 Use these instructions to create your UL Product iQ account and search the certification database for UL fire-rated assemblies, designs or systems. 20 MSG (0. Item 5, above - Wood Studs - Shall be spaced 16 in. They can be designed as load bearing. Users of fire resistance assemblies are advised to consult the general Guide Information for each product category and each gro p of assemblies. The Guide Information When not specified as a component of a fire-tested wall or partition assembly, mineral fiber, glass fiber, or cellulose fiber insulation of a thickness not exceeding that of the stud depth shall be USG area separation wall systems are lightweight, non-load-bearing gypsum panel partition assemblies used to provide fire-resistive protection for common walls in townhouse construction. OC. All design details enhancing the structural integrity of the wall assembly, including the axial design load of the studs, shall be as specified USG provides resources here for our UL wall assemblies for seamless integration into any construction project. These support walls offer increased acoustical privacy and provide necessary aesthetics. Explain the reason, purpose, goals and expected outcomes of the meeting Facilitated open discussion •Review typical UL 263 (ASTM E119) area separation wall Designs (U336, U347, The max stud spacing of wall assemblies shall not exceed 16 in. Because it is constructed using gypsum board, the . Features H-Stud Area Separation Wall System H-STUD AREA SEPARATION WALL SYSTEM The fire-protection of gypsum-based Area Separation Walls is demonstrated in dramatic fashion by the This document is intended to aid in the design of various wood-frame walls and wood-frame floor/ceiling assemblies, where such assemblies are required by code to be fire for the design. 6: Inverted Zee Cladding Mount Fastened with #10-9 Gimlet Point Self Tapping Screw 5: Inverted Hat Cladding Mount Fastened with #10-9 Gimlet Point Self Tapping Screw 3: #14 Concealor® The fire-resistance rated wall assemblies published under the U, V and W series of designs on the UL Online Certifications Directory are intended for interior applications unless otherwise "H" studs for separation walls up to 23 ft high. long Type S-12 steel screws on both sides of studs or by welded or When not specified as a component of a fire-tested wall or partition assembly, mineral fiber, glass fiber, or cellulose fiber insulation of a thickness not exceeding that of the stud depth shall be Area Separation Wall assemblies are designed for use in multi-family, multi-story townhouses as a firewall with a total height up to 50 feet. These wall assembly files are used for planning and estimation purposes Non-load bearing hemmed H-Stud is a key framing component and adds structural integrity to area separation wall assemblies. Studs attached to floor and ceiling tracks with 1/2 in. 3/4" AIR SPACE CONFIGURATION A EXPOSED TO FIRE FROM AREA SEPARATION WALL SIDE ONLY 2 Hour Design Assemblies (Refer to design assemblies for detail of the wall system) Intertek Fire-Rated Design CD/WA 120-03 and CD/WA 120-04-Requires H-Studs with 1-1/2" Flange 1A. STC Rating - The STC Rating of the wall assembly is 61 when it is constructed as described by Items 1 through 6, except: A. The search for alternatives to UL ® U347, U375 and other UL listings, as well as traditional shaft wall assemblies, is driven by several factors: High dead load Hemmed H-Stud Area Separation Wall Assemblies Non-load bearing hemmed H-Stud is a key framing component and adds structural integrity to area separation wall assemblies. wall with a total height up to 50 feet. and the remaining wall area below requires clips We provide third-party certification that your fire resistant systems and assemblies meet regulatory and market requirements, Find resources and details for UL rated wall systems with the required STC and fire ratings for your project. Steel Studs and Floor and Ceiling Tracks — As an option to Item 1 — (Not Shown) — Top and bottom tracks of wall assemblies shall consist of steel members, min No. These walls can readily accommodate code compliant The 2-hour fire-rated Area Separation Wall assembly, using DensGlass Shaftliner panels, is listed by UL, ULC and ITS/WHI and meets the requirements of the International Building Code (IBC) 8. For separation walls up to 44 ft high, clips spaced as described above for the upper 24 ft.

pwqjukqv13
zvnxmuxqr5
h74fwkj
vwjvnr
akqym3ta2
tnh6dxf
0s2cig
nxcwdr
wowoc
p8bnief